| Status Indicators | | Includes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning |
| Interfaces/Ports | | 1 x USB
1 x DB-9 |
| Batteries | | Sealed Lead-acid Hot-swappable |
| Manufacturer | | Tripp Lite |
| Load Capacity | | 1000VA/750W |
| Standard Warranty | | 2 Year |
| Package Contents | | SMART1200XLHG Medical Grade Tower UPS System PowerAlert Software and cabling Warranty information Instruction manual |
| Network Management | | SNMP Manageable Optional |
| Backup/Run Time | | 16 Minute 1000VA Full-load
34 Minute 500VA Half-load |
| Manufacturer Part Number | | SMART1200XLHG |
| Form Factor | | Wall-mountable Tower |
| Temperature | | 32 F (0.0 C) to 104 F (40.0 C) Operating |
| Overload Protection | | Resettable circuit breaker |
| Plug/Connector Type | | NEMA 5-15P |
| Additional Information | | Ideal UPS protection for applications in medical patient-care areas where UL 2601-1 listed medical electrical equipment is required Maintains less than 300 microamps leakage current for UPS and all connected equipment Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes Provides connected equipment with continuous power during short and long duration loss of commercial power Expandable runtime is available with the addition of one or more external battery packs (part# BP36V27) Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections Full line isolation prevents shock potential and operational problems in sensitive electronic equipment Resistant to electrostatic discharge Supports loads up to 1000VA / 750 watts 34 minutes half load runtime (500VA/375 watts), 16 minutes full load runtime (1000VA/750 watts) 4 protected hospital-grade outlets; 6-ft. cord 1-RS-232 and 1-USB serial port for network interface; SNMP compatible SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory Complete surge protection, line isolation and EMI/RFI noise filtering 2 year product warranty PowerAlert unattended shutdown software and complete cabling included 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace Battery replacement door Back panel grounding lug |
| Input Voltage | | 110V AC |
| Alarm | | On Battery
Overload
Low Battery |
| System Requirements | | TYPICAL APPLICATIONS:UL 2601-1 listed UPS provides ultimate safety and reliability for patient point of care solutions, telemedicine, nurse''s stations, wireless communications systems, electronic prescribing applications, medical imaging and mission critical equipment. Not recommended for life support applications |
| Manufacturer Website Address | | www.tripplite.com |
| Power Cord/Cable | | 6 ft |
| Battery Life | | 3 Year to 6 Year |
| Humidity | | 0 to 95% Non-condensing Relative Humidity |
| Receptacles | | 4 x NEMA 5-15R |
| Certifications & Standards | | UL1778 (USA, Series AGSM1200PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications |
| Dimensions | | 12.75" Height x 7.5" Width x 9" Depth |
| Brand Name | | Tripp Lite |
| Input Voltage Range | | 120V AC Single-phase |
| Battery Recharge Time | | 4 Hour |
| Product Line | | SmartPro |
| Output Voltage | | 120V AC Single-phase |
| Shipping Dimensions | | 17.75" Height x 13.25" Width x 12" Depth |
| Frequency | | 60Hz |
| Weight | | 44.6 lb |
| Shipping Weight | | 51 lb |
| Product Name | | SmartPro 1200XLHG UPS |
| Product Type | | Line-interactive UPS |
| Filtering | | EMI / RFI |